600 Gallon Breddo Model LORWWSS 316 S/S Jacketed Scrape Surface Likwifier conical bottom blender. National Board 32546. Interior dimensions are 64 inch diameter x 40 inch straight side height x 15 inch cone. Overall dimensions are 72 inch wide x 123 inch long x 116 inch high with legs and agitator. the bottom has a 3 inch TriClamp discharge that is 25 inch from the ground and a 14 inch diameter high shear blending impeller driven by a 125 hp 1770 rpm motor. The top has two 1/3 hinged lids, four 2 inch Tri-Clamp inlets, two 1.5 inch Tri-Clamp inlets and one 2 inch inlet. The side and bottom jackets have a Maximum Working Pressure (MAWP) of 125 psi @ 400 F, a Minimum Design Metal Temperature (MDMT) of 0 F @ 125 psi, and (4) 2 inch NPT inlets/outlets. Tank is equipped with a side and bottom scrape agitator. Agitator is driven by a 7.5 hp 1720 rpm with a 96.8 to 1 ratio gear reduced euro drive motor. Serial number 267622 01117. Requires 230/460 vac 3 phase electrical supply. Built in 2001 and refurbished in 2008. Good Condition.at 400 F, a Minimum Design Metal Temperature (MDMT) of 0 F @ 125 psi, and (4) 2 inch NPT inlets/outlets. Tank is equipped with a side and bottom scrape agitator. Agitator is driven by a 7.5 hp 1720 rpm with a 96.8 to 1 ratio gear reduced euro drive motor. Requires 230/460 vac 3 phase electrical supply. Built in 2001 and refurbished in 2008.
Have Inventory to Purchase or Sell?
Looking to purchase equipment? Have one of these to sell?
