Loeb # 66754 Model ImmersionWasher
OEM Vanmark Corp
Year Serial
Electrical Location USA
Condition Asis Size 0.00
Lease for only 455.71 / mo. Rent for only N/A
Have one of these to sell? Need One Of These!
VANMARK STAINLESS STEEL IMMERSION WASHER / RINSER / DIP TANK. 10 ft long by 46 inch wide by 32 inch deep wet tank, with 36 inch wide by 14 ft long elevating discharge conveyor. There is a 4 inch DESTONER GAP between the tank and the belt at the infeed end where rocks and sinkers would drop into the bottom of the tank for later cleanout, but the conveyor is otherwise trimmed in UHMW such that product cannot get around or behind the conveyor. The conveyor has a plastic interlocking chain type belt with rectangular perforations 1/2 inch long by 3/16 inch wide, and has 1 inch cleats on 4 inch centers, and runs between 6 inch high stainless steel sides. The conveyor sits at maximum water depth of about 23 inch, and the conveyor body is on a hinge so it can be tipped up for cleaning. 33 inch infeed height into the tank, 68 inch discharge height from the discharge belt, or 36 inch discharge height from a removable, bolted-on, dual split discharge with 8.5 inch diameter outlets on 18 inch centers. The conveyor extends 5 ft 9 inch past the end of the tank for an overall length of 15 ft 10 inch. The conveyor has an SEW Eurodrive 3 phase mechanical variable speed drive. Beneath the conveyor at the discharge end is a 20 inch long by 64 inch wide by 32 inch deep overflow / recirculation tank which is plumbed via a center bottom outlet to a bronze filter, then on to a stainless steel CENTRIFUGAL PUMP with a .5 HP 208/230/460 volt 3 phase motor, which returns / recirculates the water into the tank via 7 water jets horizontally arrayed along the upper lip of the infeed end of the tank. The recirculation tank is wider than the rest of the washer, with a hinged stainless steel cover over the part that sticks out of the left side, which would facilitate access for making up solution. All food grade sanitary stainless steel construction (but for the motors). Overall dimensions: 16 ft Long by 66 inches wide by 88 inches high on the floor

Have Inventory to Purchase or Sell?

Looking to purchase equipment? Have one of these to sell?

Click Here