UNUSED Dekka Model 22, 2 Inch Wide S/S Tape Head. Uses 2 in W Tape, length 2.325 in to 2.75 in L. Runs up to 80 to 120 FPM. The Dekka 22 is the standard Dekka tape head. Eighty percent of production lines are mid-speed applications that require a tape head of this kind, durable and consistent. Dekka 22 tape heads are precision constructed in high quality stainless steel using modern laser cutting technology and are highly finished for appearance and corrosion resistance. Easy To Load With Dekkas open side frame design, tape loading is simple and easy. Loading can be done in 30 seconds or less without removing the tape head or taking the machine out of adjustment, which reduces down time and costly production delays. Exclusive No Break Tape Advance In conventional tape heads, feed rolls pull tape along its edges where breaks actually occur. Dekkas exclusive No Break Tape system advances the tape along its centerline, avoiding edge stress and helping to prevent tape breaks. This system eliminates delays and lost production. External Tape Guide System Dekkas external tape guide physically holds tape ends in place unaffected by external drafts or loss of static attraction to the wipe down roller. The guide remains free from troublesome adhesive build-up. Whether taping case tops or bottoms, Dekka tape heads reliably seal case after case, avoiding costly reprocessing of untaped cases. Easily Adjustable Roller Tension Spring The main spring tension may be adjusted by selecting one of four preset leverage points. Adjustments are unaffected by vibration and shock. High Quality Molded Wipe Down Rollers Many tape heads are fitted with separate roller sleeves, requiring frequent replacements due to surface breaks and splits. Dekkas polyurethane wipe down rollers are molded in one piece. The result is tougher, longer lasting rollers requiring less maintenance.
Have Inventory to Purchase or Sell?
Looking to purchase equipment? Have one of these to sell?