| Loeb # | 200120 | Model | PX40 |
|---|---|---|---|
| OEM | Phoenix Manufacturing | ||
| Year | 2014 | Serial | 14119 |
| Electrical | Location | Minnesota | |
| Condition | As is | Size | n/a |
| Lease for only | 1,822.82 / mo. | Rent for only | N/A |
Phoenix Model PX40 Gas Fired Oil Heater. 3.6 MM – 4.5 MM BTU Per Hour Output. Maximum Design Working Pressure 125 PSI at 650 Degrees F. 650 Degree F Maximum Design Temperature. Minimum Design Metal Temperature 33 Degrees F at 125 PSI. National Board # 95. Double Helical Coil Design With Heatmizer Fins For Improved Heat Extraction From Air Stream. Natural Gas Power Burner With Full Modulation Rated at 5.0 Mmbtu/Hr. The Unit Will Be Complete And Ready To Fire After Connecting To The Electric, Fuel, And Hot Oil Circulation Piping. The Coil is Designed And Stamped According To ASME For 125 Psi MAWP. The Coils Are SA-106 Seamless Pipe. Heater Maximum Output: 4.0 Mmbtu/Hr. Based On Supply/Return ΔT of 100 Degrees F, And A Hot Oil Flow Rate Of 200 GPM. 3 In Inlet/Outlet Nozzles. ANSI 300# WNRF Flanges. Hot Oil Rate 200 GPM. Shell To Be A36 5/16 In Carbon Steel Wrapped With 2 In Thick High Temperature Insulation Covered With a Galvanized Steel Skin. One 300 Gallon Expansion Tank. One 200 GPM Hot Oil Circulation Pump. The Burner Provided Shall Be a Webster Natural Gas Power Burner With Ultra Lonox Design (<9 PPM), Burner Requires Natural Gas For Combustion, UV Flame Scanner, Ignition Transformer.
Looking to purchase equipment? Have one of these to sell?
Click Here