Show: 24 48 96 Reset

ILLIG UNUSED FS35 Thermoforming/Foil Sealer w/ HSA50D Blister Pack (Dual Card Stock)

Loeb # 62924 Model FS35HSA50D
OEM Illig Maschinenbau GMBH and Co
Year 2006 Serial 58601036731124
Electrical Location E-01W
Condition Running Size 0.00
Lease for only 15,494.01 / mo. Rent for only N/A
Have one of these to sell? ITEM SOLD: Need One Of These?
ILLIG UNUSED FS35 Thermoforming/Foil Sealer, never installed, thermoforms the blister, 10 ft L packing area for packing of the blister, (6) probe static eliminator station, seals the blister in line formation, servo driven running 6-wide with foil backing, 13 in L Horizontal guilotine cutter, w/ (7) 3 1/4 in Dia vertical wheel slitters, servo driven heated die formers made of two primary components, (6) clip style pickup station travels on 45 in L arm to place into HSA50 D Blister card stock unit. All stations are equipped with electro mechanical drives. Furthermore, the machine is equipped with a quick change system, i.e. all format parts are supplied with quick grippers, tool removal to the operating side, the material transport is automatically adjusting to the dimensions of the mould. 20 sets of setting data can be stored in the storage (tool setting data). Runs only with foil backing on the blister. HSA50D Blister Pack (Dual Card Stock)- sealing pallet transport with A.C. servo drive for 20 pallets; with 9 pallet positions = 3429 mm; mechanically and electrically standardized interfaces on transport stand to mount working stations at relevant locations in a modular way; card loader for cards and labels, without guarding adjacent to feed, space requirement: two pallet positions; sealing heater with multiple-zone regulation, multiple-clamping of electrode, energy saving by improved insulation; sealing station with double card monitoring; equipment for compressible recycling cards; automatic cooling of sealed blisters when machine stops, infinitely variable adaptation to material thickness, lower bridge driven; without guarding at feed and discharge, space requirement: one pallet position; motor-driven pack lift-out device; without guarding adjacent to feed, space requirement: one pallet position; discharging conveyor 1500 mm, linear or rectangular arrangement; PLC unit (Siemens S7); screen operating panel (Siemens OP 17); non-wearing electronic power relays; internal setting data storage of 40 data sets; pneumatic cylinder and valves for oil-free air; maintenance-free bearings; counter of cycles and production hours; quick-change device for change of all format parts and pallets without any hand tools; vacuum supply of machine included; three-phase supply with loadable neutral, power supply: 3/PEN (N/PE), 50 Hz, 400 V, TN; Blister- Blister depth max.80mm, width min. 47mm, card size (EURO hole, 1-up format layout) 500x340, card size (EURO hole, 8-up format layout) 58x340. Runs only with cardboard backing on the blister.

Have Inventory to Purchase or Sell?

Looking to purchase equipment? Have one of these to sell?

Click Here