Adco Model AFCX351SS S/S 40 CPM Top Load Hot Melt Carton Erector and Conveyor
Loeb # |
72939 |
Model |
AFCX351SS |
OEM |
Adco Manufacturing |
Year |
2010 |
Serial |
5160HG |
Electrical |
3/460/60 |
Location |
LOEB East Bldg #4 East Side |
Condition |
As is |
Size |
40.00 |
Lease for only |
920.53 / mo. |
Rent for only |
N/A |
Have one of these to sell?
ITEM SOLD: Need One Of These?
Adco Model AFCX351SS S/S Top Load Hot Melt Carton Erector. Speeds up to 40 Cycles Per Minute Depending on Configuration. Former Has Single Mandrel 5 3/4 in L x 4 1/4 in W, Allen Bradley Panel View Plus 600 HMI Control Screen Interface, Nordson Model 1022237A ProBlue 4 (2) Head Hot Melt System (S/N SA10D65734), Becker Vacuum Pump. Carton Size Range: Length of Opening 75mm Minimum - 430mm Maximum. Width of Opening 75mm Minimum - 200mm Maximum. Carton Depth 19mm Minimum - 115mm Maximum (not all minimums and maximums may apply at the same time). 25.5 in L x 13 in W Carton Blank Magazine. Electrocam Plus 5000 Series Programmable Limit Switch Controls. 460 Volt, 3 Phase, 60 Hz, 25 Amp. Air Requirements 5 CFM, 90 PSI. Includes 21 ft L x 4 1/2 in W Stainless Steel Manual Pack Station Conveyor with Lugged Chain Belt, 15 in on Center, 142 1/2 L x 11 1/2 in W Table Top, on Casters.